Groups - US Robotics USR3520 User Manual

Groups

The main purpose of a group is that a user can provision (Over-the-Air) the exact same settings/software
to a number of devices, while the devices are out in the field.

A Gateway device must always be inside a group, but can ONLY belong to 1 group

A Gateway hardware device is owned by the group (and not a person)

Only the same device type can be inside 1 group.
Add a group

To add a new group, click the 'Add Group' button within the Device section.

You will then see the following screen:

Fill in the 'Name' of the Group, Device Type and a 'Description' (optional) of the Group.

This new group will then be visible in the 'Group' overview

The user who created the group, becomes by default an 'Owner'
Revision: 1.00 Copyright 2015 U.S. Robotics Corporation 115 | P a g e