US Robotics USR3520 User Manual page 114

Activation of devices in bulk

It is only possible to use the Bulk Device activation when all the devices being activated are the
exact same device type and being added to the same group.

From the 'Device' section please click the 'Activate new device'.

Then click the tab 'Bulk Device Activation'

Then fill in the Serial and activation code (separated with a comma) for the devices to be
activated - 1 device per line. It is also possible to add a name per device (optional) if added after
each activation code. If no name is chosen the serial number will be used.

Then choose the Group they should be added to (needs to be the same device type)

When the Gateway devices are power up, it will check-in to USR Universe. USR Universe will
then enable these devices and it will be activate and visible in the group view.

The Gateways will download the group setting (or custom setting), if they differ from what is
currently deployed.
Revision: 1.00 Copyright 2015 U.S. Robotics Corporation 114 | P a g e