US Robotics USR3520 User Manual page 105


Aeris

AT&T

Bell Mobility

Sprint

T-Mobile

Telus

Verizon Wireless
Regulatory information
This device complies with Part 15 of the FCC rules and with Industry Canada license-exempt RSS
standards. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
Federal communications commission notice
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Exposure Information to Radio Frequency Energy
Users concerned with the risk of Radio Frequency exposure may wish to limit the duration of their calls
and to position the antenna as far away from the body as is practical.
Modifications
Any changes or modifications made to this device that are not expressly approved by USRobotics could
void the user's authority to operate the equipment.
USR803520 3G EMEA
CE
This device complies with the essential requirements of the R&TTE directive (1999/5/EC) issued by the
Commission of the European Union.
The USR803520 3G EMEA is certified together with the following expansion cards:

model CG1101, the Low cost serial card;

model CG1102, the Industrial serial card;

model CG1103, the Ethernet switch with PoE;
Revision: 1.00 Copyright 2015 U.S. Robotics Corporation 105 | P a g e