Table of Contents
Advertisement
Warning: In firmware versions 1.12.0 and older, the ability to choose between automatic mode and
manual mode and to set a connection priority list are not available. These firmware versions always
try to connect to the internet over the Ethernet interface first. When this interface is not able to
connect to the internet, the gateway will try to connect to the internet via the WWAN interface.
Related Topics
Configuring the Base Unit
Ethernet Tab
3G Connection Tab
WAN/LAN switchover feature
Installing the Gateway
To install the base unit out of the box, review the installation requirements and then follow the
installation steps listed below. For information about customizing the base unit, learn about
expansion cards
and provisioning the device with a custom developer image.
Installation Requirements
Gateway base unit
Included power supply
Included WWAN antennas
Ethernet cable
Web browser on a laptop or smartphone.
A service plan from a wireless service provider.
o One of the following US wireless service providers:
Sprint
Verizon Wireless
AT&T (requires SIM)
T-Mobile (requires SIM)
o For non US wireless service providers, any WCDMA based network will work.
Browser Requirements
For the Provisioning Server:
Chrome 27.0 (.1453.110 m)
Firefox 21.0
Internet Explorer 9 (.0.8112.16421)
Internet Explorer 10 (.0.9200.16540)
Revision: 1.00
Copyright 2015 U.S. Robotics Corporation
installing
10 |
P a g e
Advertisement
Table of Contents
