Table of Contents
Advertisement
Group 25 Inlet and Exhaust System
180
Plus d'informations sur : www.dbmoteurs.fr
Inspection
Bearing housing
Measure inside diameter of bearing-fitted section
If the measured diameter exceeds the service limit,
replace the bearing housing.
Inside diam. bearing-fitted section, mm [in.]
Service Limit ............. 30.006 [1.18134]
Bearing
Measure bearing outside diameter
If the measured diameter is less than the service limit,
replace the bearing.
Bearing inside diameter, mm [in.]
Service Limit ............. 29.876 [1.17622]
Measure bearing inside diameter
If the measured diameter exceeds the service limit,
replace the bearing.
Bearing inside diameter, mm [in.]
Service Limit ............. 18.050 [0.71063]
Measuring bearing length
If the measured length is less than the service limit,
replace the bearing.
Bearing length, mm [in.]
Service Limit ............. 17.440 [0.68661]
Advertisement
Table of Contents
