Table of Contents
Advertisement
Plus d'informations sur : www.dbmoteurs.fr
Assembling the bearing and front cover
1. Install the O-ring and bearing outer race on the
front cover.
2. Install the front cover on the pump case by
striking with a hammer.
3. Tighten the front cover mounting bolts.
Assembling the camshaft center bearing
1. Install the bearing inner race on the camshaft by
striking with a hammer.
2. Lay the pump case on its side.
3. Place the center bearing on the camshaft, and in-
sert the shaft into the pump case.
4. Slowly rotate the camshaft and align the bolt hole
in the center bearing with the bolt hole in the
pump case, then tighten the mounting bolt.
Group 23 Fuel System
161
Advertisement
Table of Contents
