Applying Windows Service Pack; Notes To Apply The Windows Service Pack - NEC N8800-103F User Manual

5-14 Procedures after Completion of Installation

APPLYING Windows Service Pack

Notes to apply the Windows Service Pack

You should not apply service packs other than those listed in "Step 1; Things Required for Setup" of
Chapter 4 "WINDOWS SETUP" (page 4-4) in User's Guide (Setup) on NEC Express5800/ft series
by yourself.
When applying Service Pack, also apply appropriate Microsoft's HotFix.
IMPORTANT:
If you want to apply Service Packs other than ones listed in "Step 1; Things Required
for Setup" of Chapter 4 "WINDOWS SETUP" (page 4-4) in User's Guide (Setup),
ask your sales agent about the application status of the Service Packs, and apply them
to NEC Express5800/ft series.
The Service Pack applied to NEC Express5800/ft series is the same as the standard
Windows Server 2003 Service Pack.
Applying Windows Service Pack
Follow the procedure below to apply Service Packs to NEC Express5800/ft series.
Service Packs will not be installed automatically to NEC Express5800/ft series during "ft series
Setup" or "Updating the system" to repair the system.
If Server Packs need to be applied, follow the procedure below.
If you want to apply Service Packs other than the ones listed in "Step 1: Things Required for Setup"
of Chapter 4 "WINDOWS SETUP" (page 4-4) in User's Guide (Setup), as your sales agent about
the application status of the Service Packs and apply them by following the procedure below:
How to apply the Windows Service Pack
IMPORTANT:
When Windows Service Pack is applied, considerations on settings of Power and Screen
Saver are required.
If the following settings are enabled when applying Windows Service Pack, the process
may stop or Windows Service Pack may not be applied properly. Disable the settings by
clearing the checkboxes before applying Windows Service Pack. Reconfigure the following
settings as necessary afterwards.
Settings of Screen Saver