NEC N8800-103F User Manual page 46

3-14 Installing Server
IMPORTANT:
Connection of optional devices
In the case of standard configuration, you need to complete setup of the operating
system before mounting optional PCI cards or hard disks that you purchased
separately.
If N8803-034 is mounted, be sure to connect cables to the FC array unit before going
on to the next step.
USB connection
modem
Back of
device
USB floppy
disk drive
Hub (multiport repeater)
To a 1000Mbps network
Keyboard (via
Display
keyboard hub to
USB mouse)
Connect the device with
the serial interface
(This cannot be used
since it is
maintenance)
LAN port (VTM)
(Connect when using
Active Upgrade)
for