NEC N8800-103F User Manual page 79

Right-click the disk (Slot 1 of PCI module 0) on which the system is installed on the left
2.
pane of the [RDR Utility] window, and click [Create RDR Virtual Disk].
TIPS:
Depending on the disk status, it takes
time to set RDR, and RDR Utility
may be stopped for a few minutes.
This is not an error. Please wait for a
while.
Click [Yes].
3.
Click [OK].
4.
IMPORTANT:
If you set RDR on the disk that
includes a system partition or a
partition that cannot be
unmounted, the message on the
right is displayed. Click [Yes].
The system is restarted after 2
minutes. After it is restarted,
perform the steps 5 and later.
Windows Setup 4-31