NEC N8800-103F User Manual page 81

Check that disk synchronization has been started and the status of the DISK ACCESS LED
8.
and RDR Utility display changes as the following table.
During synchronization
Synchronization
source disk
Synchronization
destination disk
RDR Virtual Disk
IMPORTANT:
- The time required for synchronization deffers depending on the size of
the partition that exists on the disk. As for the partition with the 18GB
capacity, it takes about 16 minutes. If there is no partition,
synchronization completes soon after setting RDR is completed and
the disk changes to the synchronization completion status.
- Setting dual disk configuration may not complete if the system is
rebooted during synchronization. Do not reboot the system before
synchronization process completes.
DISK ACCESS
LED
Amber and
blinking
Amber and
blinking
Windows Setup 4-33
RDR Utility
Condition
Simplex
Syncing
Resync x %
Simplex (x=0, 10, 20,...,
Status
90)