Roll Printing Is Selected; Roll Printing Is Selected, But Sheets Are Loaded; The Roll Is Empty - Canon iPF815 User Manual

Error Message >

Roll printing is selected.

You have attempted to print a job sent from a computer or a test
print sheet or other printer status information on a roll, but no roll
is loaded.

Roll printing is selected, but sheets are loaded.

A print job for rolls was received when a
sheet is loaded.

The roll is empty.

"Lift the release lever and replace the roll."
The roll is empty.
13
836
Roll printing is selected.
Messages regarding paper >
Cause
Cause
Cause
Load a roll and try printing again.
To print on a sheet instead, hold down the Stop
button for more than a second to cancel print-
ing, load a sheet, and then print.
(See "Loading and Printing on Sheets.")
→P.7
Corrective Action
Follow these steps to load and print on a roll.
1. Press the OK button and remove the sheet.
(See "Removing Sheets.")
2. Load a new roll.
(See "Loading Rolls in the Printer.")
The printer now starts printing the print job.
Hold down the Stop button for a second or more to cancel printing.
Follow these steps to replace the used roll with a new
roll of the same type and size.
1. Lift the Release Lever and remove the roll.
(See "Removing the Roll from the Printer.")
→P.591
(See "Removing the Roll Holder from Rolls.")
→P.593
2. Load the new roll.
(See "Attaching the Roll Holder to Rolls.")
→P.581
(See "Loading Rolls in the Printer.")
3. If no barcode was printed on the roll, specify the
type of paper.
(See "Selecting the Paper Type (Roll).")
→P.589
4. If no barcode was printed on the roll, specify the
paper length.
(See "Specifying the Paper Length (Roll).")
→P.590
5. If "Not finished printing. Finish printing remain-
ing jobs?" is shown on the Display Screen, press
the OK button.
Printing will resume, starting from the page on
which the error occurred.
Corrective Action
→P.612
→P.584
Corrective Action
→P.584
iPF815