Specifying The Cutting Method For Rolls - Canon iPF815 User Manual

Handling Paper
3.
In the Paper Detailed Settings dialog box displayed next, select the desired settings values in
ges and
(See "Paper Detailed Settings Dialog Box (Mac OS X).")
7
Note
• By factory default, Drying Time is deactivated ( Off ) for all paper types.
• To have the printer wait for ink to dry immediately after printing without releasing paper, set Cutting
Mode to Eject in the printer menu.
(See "Specifying the Cutting Method for Rolls.")

Specifying the Cutting Method for Rolls

How a roll is cut after ejection varies depending on the printer settings.
Automatic
Eject
598
→P.599
Man-
ual
→P.600
Specifying the Cutting Method for Rolls
> Handling rolls >
D B
Between Scans in Drying Time, and then click OK.
Cutting Method
The roll is automatically cut by the Cutter
Unit following printer driver settings.
Choose this setting if you prefer not to have
documents dropped immediately after print-
ing, as when waiting for ink to dry.
To cut the roll using the Cutter Unit, hold
down the Stop button for a second or more.
Choose this setting when using media that
cannot be cut using the Cutter Unit.
Cut each page from the roll using scissors. For
continuous printing (if you will cut each page
later), in Auto Cut, select Yes, or select Print
Cut Guideline.
(See "Cutting Roll Paper After Printing.")
→P.183
→P.412
→P.598
Menu Settings
Cutting Automat-
Mode ic
Eject
Manual
C
Between Pa-
Driver Setting
Auto Cut Yes
Yes
No Yes
Print Cut
Guideline
iPF815