Handling Paper
• 2-Inch Paper Core Attachment
5.
Insert the Holder Stopper from the left in the Roll Holder as shown. Holding it at the position shown (b), push it
firmly in until the flange (a) of the Holder Stopper touches the roll. Lock the Holder Stopper lever (c) by push-
ing it down toward the shaft side.
7
584
Loading Rolls in the Printer
Follow these steps to load rolls in the printer.
Note
• Remove any loaded paper that will not be used.
• Rolls (See "Removing the Roll from the Printer.")
• Sheet (See "Removing Sheets.")
• If the Platen is dirty, clean inside the Top Cover. (See "Cleaning Inside the Top Cover.")
• After pressing the Load/Eject button, you can refer to instructions on the Display Screen as you load the
paper. (See "Checking Instructions During Printer Operations.")
Loading Rolls in the Printer
>
Handling rolls
>
→P.591
→P.612
→P.781
→P.694
iPF815