Handling Sheets - Canon iPF815 User Manual

Handling Paper

Handling sheets

Selecting the Paper Type (Sheet) ............................................................................................................. 606
Loading Sheets in the Printer .................................................................................................................... 607
Manually Loading Paper to the Position for Printing ................................................................................. 610
Removing Sheets ...................................................................................................................................... 612
Selecting the Paper Type (Sheet)
When changing the type of paper after the paper has been advanced, specify the type of paper as follows.
Note
• After you load the sheet, the printer automatically shows a menu for selection of the paper type on the
Display Screen. In this case, select the paper type, and then press the OK button. The printer will auto-
matically go online.
1.
Press the Menu button to display MAIN MENU.
7
2.
Press ▲ or ▼ to select Media Menu, and then press the ▶ button.
3.
Press ▲ or ▼ to select Cut Sheet Type, and then press the ▶ button.
4.
Press ▲ or ▼ to select the type of paper loaded in the printer, and then press the OK button.
606
Selecting the Paper Type (Sheet)
> Handling sheets >
Note
• For details on paper types, see the Paper Reference Guide.
Plain Paper is selected by factory default.
→P.575
If you move the Release Lever, the setting automatically reverts to Plain Paper.
• Be sure to select the correct paper type. If this setting does not match the loaded paper, it may
cause feed errors and affect the printing quality.
• If you select a type of paper for which Media Width Detection is deactivated ( Off is selected),
you must advance the paper manually to the position for printing. (See "Manually Loading Pa-
per to the Position for Printing.")
→P.610
(See "Types of Paper.")
iPF815