Job Management - Canon iPF815 User Manual

Printer Parts > Control Panel
(The type of paper is dis-
played here.)
( *1
→P.678
9
*1: For information on the types of paper the printer supports, refer to the Paper Reference Guide. (See "Types
of Paper.")
the Control Panel ) are updated when you install the printer driver from the User Software CD-ROM or if
you update paper information by using the Media Configuration Tool.

Job Management

Print Job
Job List
678
Stor- Mail-
ed box
Job List
Main Menu Settings
>
Setting Item
Cutting Mode
)
Bordless Margin
CutDustReduct.
NearEnd Sht Mrgn
Return Defaults
The types of paper indicated in the printer driver and related software (as well as on
→P.575
Setting Item
(Choo Delete
se a
print
job)
Preempt Jobs
(Enter Job (Choo
a List se a
pass- print
word job)
if one
Print Job List
has
been
set.)
Description, Instructions
Specify whether or not to cut with the standard round-
bladed cutter.
Choose Automatic to have the roll cut automatically af-
ter printing. If you choose Manual, the paper will not
be cut after printing. Instead, a line will be printed at the
cut position.
Choose Eject if you prefer not to have documents drop-
ped immediately after printing, as when waiting for ink
to dry.
Adjust the margin during borderless printing.
Choose Automatic to have the printer automatically de-
tect the paper width and configure the margin settings
for borderless printing. If margins are mistakenly cre-
ated when Automatic is selected, choose Fixed. In this
case, the paper width is not detected automatically, and
the document is printed without borders, using the mar-
gin settings required by the printer.
If you choose On, a line will be printed at the cut posi-
tion when paper cutting is selected. This option reduces
the amount of debris given off after cutting. It also helps
prevent adhesive from sticking to the cutter and keeps
the cutter sharp if you use adhesive paper. (See "Re-
ducing Dust from Cutting Rolls.")
Specify a margin at the leading edge of sheets to ensure
better printing quality at the leading edge.
Note that if you choose 3mm, it may lower the printing
quality at the leading edge and affect feeding accuracy.
The printed surface may be scratched, and ink may ad-
here to the leading edge.
Choose Yes to restore Paper Details to the default val-
ues.
Description, Instructions
Delete the current job or queued jobs. (See "Managing
Queued Jobs (Deleting or Preempting Other Jobs).")
→P.532
Print the job first after the current print job is finished.
(See "Managing Queued Jobs (Deleting or Preempting
Other Jobs).")
→P.532
Print Print the saved job.
De- Delete the saved job.
lete
Print a list of saved print jobs.
→P.604
iPF815