Canon iPF815 User Manual page 814

Troubleshooting
8.
Hold the edge of the roll paper in the middle as you gently pull it evenly to the position of the Ejection Guide
(a). Align the right side of the roll paper with the Paper Alignment Line (b), keeping this side parallel to the line,
and then lower the Release Lever.
9.
12
Close the Top Cover.
798
10.
Turn the printer on. (See "Turning the Printer On and Off.")
The roll is now advanced. After it is finished being advanced, you can resume printing.
Clearing Jammed Roll Paper
> Problems Regarding Paper
Important
• Always move the Carriage to the right side. If the Carriage is on the left, a Carriage error may
occur when you turn on the printer.
Important
• Do not force the roll paper into alignment with the Paper Alignment Line (b). This may prevent
the paper from being advanced straight.
• If you pull out too much of the roll, an excessive amount will be cut away.
Note
• You can ensure that the edge is cut neatly by selecting Paper Cutting in the printer menu.
(See "Specifying the Cutting Method for Rolls.")
>
→P.648
→P.598
iPF815