Regular Printing Is Selected, But A Roll Is Loaded; Paper Jam; Paper Loaded Askew - Canon iPF815 User Manual

Error Message >

Regular printing is selected, but a roll is loaded.

A print job for printing on
sheets was sent when a roll is
loaded.
You are using a roll with the
Media Take-up Unit, but a
print job requiring sheets was
sent.

Paper jam.

"Lift the release lever."
Cause
A paper jam occurred
in the printer during
printing.
"Manually rewind the roll all the way and press OK."
Cause
A paper jam occurred
when advancing the
13
paper.

Paper loaded askew.

838
Paper is loaded askew.
Regular printing is selected, but a roll is loaded.
Messages regarding paper >
Cause
Hold down the Stop button for a second or more to cancel printing.
Remove the roll and load a sheet of the type and size of paper you have specified
in the printer driver.
(See "Removing the Roll from the Printer.")
(See "Loading and Printing on Sheets.")
1. Press the Stop button for a second to cancel the job involving sheets.
2. Choose Paper Cutting in the menu.
3. Press the Load/Eject button and remove the roll.
4. Load a sheet and resend the print job.
1. Lift the Release Lever and remove the jammed paper.
(See "Clearing Jammed Roll Paper.")
(See "Clearing a Jammed Sheet.")
2. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display
Screen, press the OK button.
Printing will resume, starting from the page on which the error occurred.
1. Rewind paper on the Roll Holder manually, all the way, and then press the OK button.
2. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display
Screen, press the OK button.
Printing will resume, starting from the page on which the error occurred.
Cause
Corrective Action
→P.591
→P.7
Corrective Action
→P.795
→P.799
Corrective Action
Corrective Action
Follow these steps to reload the roll.
1. Lift the Release Lever.
2. Open the Top Cover.
3. Adjust the right edge of the roll to make it parallel to the
right Paper Alignment Line.
4. Lower the Release Lever.
5. Close the Top Cover.
(See "Loading Rolls in the Printer.")
→P.584
iPF815