Paper Is Not Cut Straight - Canon iPF815 User Manual

Troubleshooting

Paper is not cut straight

The paper is bent or curled at the cut position.
Paper rises by the ends of the cut position before it is cut.
Paper is not cut
In the printer driver, No or Print Cut Guide-
line is specified in Auto Cut.
In MAIN MENU, Eject or Manual is speci-
fied in Cutting Mode.
Rolls are not cut when you are using the Me-
dia Take-up Unit.
The Media Take-up Unit Continues Rotating
There is a foreign object in the path of the Media Take-up Sensor (indica-
ted by a dotted line).
12
804
The Media Take-up Sensor cord is not connected to the Right Media Take-
up Unit correctly.
Paper is not cut straight
> Problems Regarding Paper
Cause
Cause
Cause
>
Straighten out any curling by the edges of the paper.
Reload the paper correctly.
Specify Yes in Auto Cut in the printer driver.
Specify Automatic in Cutting Mode in MAIN MENU.
Either execute Paper Cutting in the Control Panel or lift the Re-
lease Lever and cut the roll with scissors.
(See "Removing Printed Documents from the Media Take-up
Unit.")
→P.710
Corrective Action
Corrective Action
Corrective Action
Remove the foreign object from the
Media Take-up Sensor path. Arrange
the Basket Cloth and Basket Rod so
they do not interfere with the Media
Take-up Sensor.
Reconnect the Media Take-up Sensor
cord as follows.
1. Turn the printer off.
iPF815