Offline Setup With Easyset - Intermec SF61 User Manual

Chapter 3 — Configuring the SF61B Cordless Scanner

Offline Setup with EasySet

56
Note: The scanner does not beep when you send configuration
commands online from EasySet. It powers off when you select
Disconnect from the Communication menu in Easyset.
To disconnect your scanner from EasySet
1 Select Disconnect from the Communication menu in Easyset.
HID connection: the scanner disconnects from EasySet and
restarts, and then goes into "ready to work" mode (the blue
Intermec Ready-to-Work indicator comes on) as it is still
connected to the host PC.
Host-initiated Outgoing SPP connection: the scanner
disconnects from EasySet and restarts but it is no longer
connected to the host PC.
To configure your scanner offline by scanning bar codes
1 Start EasySet. The first time you start EasySet, the Select product
dialog box appears.
If the Select product dialog box does not appear, choose Product
> Select or click on the product icon in the upper left corner of the
EasySet window.
2 Select your product.
3 Open the folders in the EasySet commands window to find the
configuration commands you need and double-click each
command to send it to the setup sheet.
4 Click on the Print icon to print out the setup sheet and then scan
the commands with your SF61B cordless scanner.
SF61 Cordless Scanner User's Guide