Clickpad/Touchpad And Buttons/Mouse - EUROCOM X8 User Manual

Quick Start Guide
1

Clickpad Cleaning
In order to improve pad
performance it is neces-
sary to keep the surface
clean and free of finger-
prints and marks etc.
Use the cleaning cloth
supplied to keep the
pad surface clean.
Disabling Clickpad
Use the Fn + F1 or Con-
trol Center button to dis-
able the
Touchpad.
4
hpad

1 - 24 Clickpad/Touchpad and Buttons/Mouse

Clickpad/Touchpad and Buttons/Mouse
The Clickpad/Touchpad is an alternative to the mouse; however, you can also add a
mouse to your computer through one of the USB ports. The Clickpad/Touchpad but-
tons function in much the same way as a two-button mouse (see page
Clickpad Sensitivity (Models A & D)
The mouse button zones at the bottom of the pad measure about 15mm from the bot-
tom of the pad, and the left and right buttons are divided roughly down the middle
as illustrated below. Press the left button zone for a left click, and right button zone for
a right click action.
Illuminated/Non-Illuminated Touchpad Sensitivity (Models B & C)
Note that the illuminated/non-illuminated Touchpad has a defined valid operational
area of sensitivity indicated within a defined sensor area; 4 mm from the top/bottom
Clickpad/
of the Touchpad edges, and 5 mm from the left/right sides of the Touchpad of the il-
lustration below:
Model A & D Computers
Clickpad for
Figure 1 - 15 - Clickpad/Touchpad Sensitivity
2 -
Touchpad for
Model B & C Computers
11).