Power Conservation Modes - EUROCOM X8 User Manual

Power Management

Power Conservation
3
Modes
The Energy Star setting
will result in maximum
power saving, but with
the possible loss of
some performance.
Setting the mode to Bal-
ance will give power
saving matched
performance.
Performance will give
optimum computer per-
formance but with less
power conservation.
Figure 3 - 7
Control Center
3 - 12 Configuring the Power Buttons

Power Conservation Modes

This system supports Energy Star power management features that place comput-
ers (CPU, hard drive, etc.) into a low-power sleep modes after a designated period
of inactivity. Adjust Power Conservation Modes from the Control Center:
1. Press the Fn + Esc key combination to toggle the Control Center on/off.
2. Click either the Performance, Balanced or Energy Star button.
3. Close the Control Center by clicking the close icon
(move the cursor onto the top right corner of the panel to highlight it).
with
in the top right of the panel

Energy Star
Display Sleep
Mode
Note that the Ener-
gy Star setting will
put the display into
sleep after no
more than 15 min-
utes of user inac-
tivity.