Table of Contents
Advertisement
20. Type "select disk #" (the # is the number of the disk you wish to select and you will need to repeat the
procedure for any of your installed disks) and press <Enter>.
21. The system will then prompt "Disk # is now the selected disk".
22. Type "clean" and press <Enter>.
23. The system will then clean the data from the selected disk.
24. Repeat the procedure for any other installed disks (type select disk # for any other disks).
25. After all the installed disks have been cleaned type "exit" to close diskpart.
26. Proceed with the Windows installation procedure (see your Windows documentation if you need help on
installing the Windows OS).
27. Install the Windows drivers from the Device Drivers & Utilities + User's Manual disc as per
(make sure you install the Intel Rapid Storage Technology driver).
page 4 - 3
Problems and Possible Solutions 8 - 25
Troubleshooting
Table 4 - 1, on
8
Advertisement
Table of Contents
Need help?
Do you have a question about the X8 and is the answer not in the manual?
Questions and answers