Table of Contents
Advertisement
Troubleshooting
21. You should select two identical disks to form your RAID volume.
22. If you have selected RAID0 (Stripe) then you can adjust the "Strip Size" to your requirements.
23. If you have selected Recovery then you can adjust the Synchronization to "On Request" or "Continuous".
24. Go to Create Volume and press <Enter>.
25. The RAID volume will then be created and the RAID information will be displayed under Intel(R) Rapid Storage
Technology (in the Advanced menu).
8
Figure 8 - 6
- Created RAID Information (Advanced > Intel(R) Rapid Storage Technology)
8 - 20 Problems and Possible Solutions
Advertisement
Table of Contents
Need help?
Do you have a question about the X8 and is the answer not in the manual?
Questions and answers