Changing The System From Raid Mode To Ahci Mode - EUROCOM X8 User Manual

Changing the System from RAID Mode to AHCI Mode

If you wish to change from a RAID mode to AHCI mode you will need to delete any existing RAID by following
the procedure below. However backup up any necessary files and data before deleting a RAID, as doing so will
result in the loss of all data on the RAID volumes.
1. Start-up your notebook computer and press <F2> to enter the BIOS.
2. Go to Intel(R) Rapid Storage Technology (in the Advanced menu) and press <Enter>.
3. Go to the RAID (listed under RAID Volumes:) and press <Enter>.
4. Select Delete and press <Enter>.
5. Select "Yes" (note that al the data on the volumes will be lost) and press <Enter>.
Figure 8 - 8
- Delete RAID (Advanced > Intel(R) Rapid Storage Technology)
Problems and Possible Solutions 8 - 23
Troubleshooting
8