Interrupt Copying - Lanier 5455 Operator's Manual

Interrupt Copying

Interrupt Copying

You can interrupt a copy job that is in progress to make a quick copy of another original,
without disrupting the original copy job settings or copy count. Do this by using the Interrupt
feature.
1
2
3
4
5
6
7
4 - 26
Press the Interrupt key.
When the copier stops:
•
Remove the remaining originals from the
Document Feeder.
•
Position the new original on the Exposure
Glass.
Make the copy requirement selections. See "Making Your Copy" on page 1-3.
Press the Start key.
When all Interrupt Copies are finished, press the
Interrupt key again to cancel the Interrupt mode.
Note: The previous copy quantity, copy
ratio, copy darkness, and paper size are
automatically reset.
Put the remaining originals that you removed in
Step 2, back into the Document Feeder.
Press the Start key to continue the original copy job.
Copying Methods