Configuring Isp Domain Attributes - H3C S9500E Series Security Configuration Manual

Follow these steps to create an ISP domain:
To do...
1. Enter system view
2. Create an ISP domain and
enter ISP domain view
Return to system view
3.
4. Specify the default ISP domain
You cannot delete the default ISP domain unless you change it to a non-default ISP domain (with the
•
domain default disable command).
If a user enters a username without an ISP domain name, the switch uses the authentication method
•
configured for the default ISP domain to authenticate the user.

Configuring ISP domain attributes

Follow these steps to configure ISP domain attributes:
To do...
1. Enter system view
2. Enter ISP domain view
3. Place the ISP domain to the
state of active or blocked
4. Specify the maximum number
of active users in the ISP
domain
Configure the self-service server
5.
localization function
6. Specify the default
authorization user profile
A self-service RADIUS server, comprehensive access management system (CAMS), or Intelligent
Management Center (iMC) is required for the self-service server localization function to work. With the self-
service function, you can manage and control you accounting information or card number. A server with
self-service software is a self-service server.
Use the command...
system-view
domain Isp-name
quit
domain default enable
Isp-name
Use the command...
system-view
domain Isp-name
state { active | block }
access-limit enable max-user-
number
self-service-url enable url-string
authorization-attribute user-
profile profile-name
29
Remarks
—
Required
—
Optional
By default, the system has a default ISP
domain named system.
Remarks
—
—
Optional
When created, an ISP domain is in
the active state by default, and
users in the domain can request
network services.
Optional
No limit by default
Optional
Disabled by default
Optional
By default, an ISP domain has no
default authorization user profile.