Attaching Mounting Brackets; Mounting The G250 - Avaya G250 Quick Start For Hardware Installation

Hide thumbs Also See for G250:

Table of Contents

Figure 2: Attaching a mounting bracket with cable guides

Attaching Mounting Brackets

Follow these steps to attach the mounting brackets:

1. Position a bracket over the desired mounting position.

2. Affix the bracket to the chassis with three flat-head 5/16" screws.

3. Tighten the screws with the screwdriver.

Follow these steps to mount the G250:

1. Position the G250 in the rack. Ensure that there is adequate ventilation.

2. Verify that the screw holes are aligned with the rack hole positions.

3. Insert two mounting screws on each side.

4. Tighten the mounting screws. Do not overtighten the screws.

5. Verify that ventilation vents are not obstructed.

Mounting in a Rack

Issue 5 November 2009

Table of Contents