Table of Contents
Advertisement
Figure 2: Attaching a mounting bracket with cable guides
Attaching Mounting Brackets
Follow these steps to attach the mounting brackets:
1. Position a bracket over the desired mounting position.
2. Affix the bracket to the chassis with three flat-head 5/16" screws.
3. Tighten the screws with the screwdriver.
Mounting the G250
Follow these steps to mount the G250:
1. Position the G250 in the rack. Ensure that there is adequate ventilation.
2. Verify that the screw holes are aligned with the rack hole positions.
3. Insert two mounting screws on each side.
4. Tighten the mounting screws. Do not overtighten the screws.
5. Verify that ventilation vents are not obstructed.
Mounting in a Rack
Issue 3 February 2007
17
Advertisement
Table of Contents
