Figure 3: Attaching a mounting bracket with cable guides
Attaching Mounting Brackets
Follow these steps to attach the mounting brackets:
1. Position a bracket over the desired mounting position.
2. Affix the bracket to the chassis with three flat head 3/8 in. screws.
3. Tighten the screws with the screwdriver.
Mounting the G350
1. Position the G350 in the rack. Ensure that there is adequate ventilation.
2. Verify that the screw holes are aligned with the rack hole positions.
3. Insert three mounting screws on each side.
4. Tighten the mounting screws. Avoid overtightening.
5. Verify that ventilation vents are not obstructed.
Mounting on the Wall
To mount the G350 on a wall, use the two mounting brackets without cable guides. You can also add a
mounting bracket with cable guides if desired (refer to
guides
on page 13).
Figure 3: Attaching a mounting bracket with cable
Mounting on the Wall
Issue 6 January 2008
13