Installing The Side Panels - Windhager LogWIN Klassik Assembly Instructions Manual

½ m wood gasification boiler; for small and large houses; nominal thermal output: 18, 25, 30 kw

Hide thumbs Also See for LogWIN Klassik:

Table of Contents

For the Installer

2.4.10 Installing the side panels

– Screw in 2 screws on the bottom of each side of the base halfway – Fig. 23. Release the side panels and hook

them into the installed screws at the bottom (Fig. 24, 25) and loosely screw the top on with one self-tapping

screw and one saw tooth ring for earthing – Fig. 26.

Note!

Only screw the cladding screws on loosely at first; do not adjust the cladding (gap size) and tighten

all screws until all cladding parts have been installed.

2 each of

Fig. 23 Screw in 2 screws on each side of the base

Fig. 24 Hooking the side panels in with screws at the

bottom

1 x

Fig. 26 Screws the side panels on loosely at the top front.

Fig. 25 Hooking in side panels

1 x

Table of Contents

Show Quick Links

Table of Contents