Remove The Front Bezel; Install The Front Bezel - HP HPE ProLiant ML110 Gen9 User Manual

Remove the front bezel

Power down the server (on page 17).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Place the server on its side.
3.
Remove the access panel (on page 17).
4.
Unlock the internal locker. Then open and remove the front bezel.
5.

Install the front bezel

Install and close the front bezel.
1.
Do one of the following:
2.
Operations 19