Table of Contents
Advertisement
Setting Time and Time Server
After completing login to the console of the 8G FC Switch, set the clock built in the 8G FC Switch
according to the following procedure.
IMPORTANT:
Previous setting of the time of the clock built in the 8G FC Switch allows the time to be
compared with logs of other devices in review of an error occurred. Set the time after
being familiar with the setting.
NOTE:
If a time server is available in environment where 8G FC Switch are used, using the
time server is enabled. If a time server is used, provide proper setting for the time
server without time setting.
Setting Time
Type "date" command on the console screen.
1.
NOTE:
Any commands used on the switch console should be specified with lowercase letters.
The current internal time of the 8G FC Switch appears.
2.
<Example of JST time display>
ALE044120T2:admin> date
Mon Sep 28 15:36:42 JST 2009
ALE044120T2:admin>
<Example of UTC display>
ALE044120T2:admin> date
Mon Sep 28 06:35:28 UTC 2009
ALE044120T2:admin>
<Example of local time display>
ALE044120T2:admin> date
Mon Sep 28 15:37:18 Localtime 2009
ALE044120T2:admin>
NOTE:
The time display setting of the 8G FC Switch is set to "JST" time display when the 8G
FC Switch is shipped from the factory.
The time display of the 8G FC Switch is selectable from the local time display which is
set by the time difference from UTC time or the area time display.
- 150 -
Advertisement
Table of Contents
