Table of Contents
Advertisement
IMPORTANT:
If a configuration name not registered in the zone information is specified, the
command causes an error to occur without the configuration enabled. Always specify a
configuration name created already.
Use the "cfgactvshow" command to confirm that the configuration is enabled.
3.
Enabled configuration names, enabled zone names and the information on ports and WWPn's and
zone alias names contained in zones appear below "Effective Configuration."
ALE044120T2:admin> cfgactvshow
Effective configuration:
cfg:
cfg1
zone: zone1
zone: zone2
zone: zone3
zone: zone4
ALE044120T2:admin>
IMPORTANT:
If enabled zoning information includes one or more setting errors, disable the
configuration and correct the zoning information.
1,0
1,1
1,2
1,3
1,4
1,5
1,6
1,7
- 181 -
Advertisement
Table of Contents
