Table of Contents
Advertisement
Modifying or Deleting Zone
The following describes modification or deletion of a zone already created.
IMPORTANT:
After modification by using a relevant command, confirm that the modification is done
normally by using the "zoneshow" command.
Add port information, WWPn and zone alias name to a zone.
1.
Use the "zoneadd" command.
Using the "zoneadd" command allows additional information (including port information, WWPn and
zone alias name) to be added to a zone.
zoneadd
"zonename" , "member"
(1) zonename:
Specify a zone name with it enclosed with double quotation marks (").
(2) member:
Specify port information, WWPn or zone alias.
NOTE:
Delimit the zone name and additional information with a comma (,).
Delimit adjacent additional information with a semicolon (;).
Delete port information, WWPn and/or zone alias name from a zone.
2.
Use the "zoneremove" command.
Using the "zoneremove" command allows port information, WWPn and/or zone alias name to be
deleted from a zone.
zoneremove "zonename" , "member"
(1) zonename:
Specify a zone name with it enclosed with double quotation marks (").
(2) member:
Specify port information, WWPn or zone alias.
NOTE:
Delimit the zone name and additional information with a comma (,).
Delimit adjacent information to be deleted with a semicolon (;).
Delete a zone created already.
3.
Use the "zonedelete" command.
Using the "zonedelete" command allows a zone to be deleted.
zonedelete "zonename" <enter>
(1) zonemame:
Specify a zone name with it enclosed with double quotation marks (").
<enter>
(1)
(2)
<enter>
(1)
(2)
(1)
- 183 -
Advertisement
Table of Contents
