Setup Procedure Of 8G Fc Switch - NEC SigmaBlade N8406-040(F) User Manual

4. Setup Procedure of 8G FC Switch

The setup procedure of the 8G FC Switch is described below.
Explained in this
User's Guide
IMPORTANT:
If the 8G FC Switch are subjected to cascade connection, perform the procedure
described in "Appendix Cascade Connection" before connecting peripherals to the 8G
FC Switch.
Installing the 8G FC Switch
Install the 8G FC Switch in Blade Enclosure.
Installing the SFP+ Module
Install the SFP+ modules in the 8G FC Switch.
Setting Up the 8G FC Switch
Provide several settings for the 8G FC Switch.
Connecting Peripherals
Connect peripherals to the external ports on the 8G FC Switch.
- 130 -
See Page 53.
See Page 58.
See Page 60.
See Page 61.