NEC SigmaBlade N8406-040(F) User Manual page 190

Saving Setting
Confirm that the 8G FC Switch is connected to the proper network.
1.
NOTE:
To save the setting information, various settings in the 8G FC Switch must be stored in
a text file to be transmitted to the FPT server. Accordingly, the 8G FC Switch must be
connected to the network.
Confirm that the FTP server is accessible.
2.
NOTE:
To save the information set on the 8G FC Switch, transmit the text file containing the
setting information to the FTP server.
Login to the console on the 8G FC Switch.
3.
Type "configupload" command on the console screen.
4.
ALE044120T2:admin> configupload
Protocol (scp, ftp, local) [ftp]:
Server Name or IP Address [host]: 192.168.1.0 100
User Name [user]: fc
Path/Filename [<home dir>/config.txt]:
Section (all|chassis|switch [all]):
Password:
configUpload complete: All selected config parameters are uploaded
ALE044120T2:admin>
IMPORTANT:
For the IP address, user ID and password of the FTP server to which the setting file is
transmitted, contact the administrator of the FTP server you use.
Sellect "all" at the Section.
NOTE:
Setting file "config.txt" is transmitted to the home directory of the FTP server.
To change the name of the setting file, enter the new file name in the File Name field.
Confirm that the text file of the name "config.txt" or specified by the configupload command is
5.
transmitted to the home directory of the FTP server.
- 190 -