Table of Contents
Advertisement
Modifying or Deleting Zone Alias Information
The following describes modification or deletion of created zone alias information.
IMPORTANT:
After modification by using a relevant command, confirm that the modification is done
normally by using the "alishow" command.
Register additional information to a zone alias.
1.
Use the "aliadd" command.
Using the "aliadd" command allows additional information (including port information and WWPn) to
be registered in the specified zone alias additionally.
aliadd
"aliname" , "member"
(1) aliname:
Specify a zone alias name with it enclosed with double quotation marks (").
(2) member:
Specify a port and WWPn.
NOTE:
Delimit the zone name and the first additional information with a comma (,).
Delimit adjacent additional information with a semicolon (;).
Delete information from a zone alias.
2.
Use the "aliremove" command.
Using the "aliremove" command allows registered information (including port information and
WWPn) specified from a zone alias specified to be deleted.
aliremove
"aliname" , "member"
(1) aliname:
Specify a zone alias name with it enclosed with double quotation marks (").
(2) member:
Specify the port and WWPn to be deleted.
NOTE:
Delimit the zone name and additional information with a comma (,).
Delimit adjacent information to be deleted with a semicolon (;).
Delete a zone alias created already.
3.
Use the "alidelete" command.
Using the "alidelete" command allows a zone alias registered already to be deleted.
alidelete
"aliname"
(1) aliname:
Specify a zone alias name with it enclosed with double quotation marks (").
<enter>
(1)
(2)
<enter>
(1)
(2)
<enter>
(1)
- 182 -
Advertisement
Table of Contents
