NEC SigmaBlade N8406-040(F) User Manual page 172

Commands Associated with Zoning
Item Command
Creating zone Alicreate
aliases
Aliadd
Alidelete
Aliremove
Alishow
Creating zone Zonecreate
Zoneadd
Zoneremove
Zonedelete
Zoneshow
Creating Cfgcreate
configuration file
Cfgdelete
Cfgclear
Cfgadd
Cfgremove
Operating Cfgenable
configuration
Cfgdisable
Cfgshow
Cfgactvshow
Cfgsave
Miscellaneous zoneobjectrename
zoneobjectexpung
e
Zoneobjectcopy
IMPORTANT:
Commands associated with zoning require some arguments. See the description on
each command for details of how to use the command.
Failure in zoning may cause a system fault to occur. Before the zoning can be
provided, you must be fully familiar with the influences of related commands on the
system.
Description
Creates zone aliases including specified ports and
WWPn's.
Registers a port or WWPn to specified zone alias
additionally.
Deletes specified port or WWPn from specified zone
alias.
Removes specified port or WWPn from specified zone
alias.
Displays zone alias information already registered.
Creates a zone including specified ports and WWPn's.
Registers a port, zone alias name or WWPn additionally.
Deletes a port, zone alias name or WWPn from specified
zone.
Deletes specified zone.
Shows zone information.
Creates zone configuration including specified zone.
Deletes specified zone configuration.
Deletes all information associated with zoning in 8G FC
Switch.
Adds specified zone to specified zone configuration.
Deletes specified zone from specified zone configuration.
Enables specified zone configuration.
Disables zone configuration enabled.
Shows configuration information.
Shows the information on zone configuration enabled
only.
Saves new configuration resulting from change.
Allows created zone, zone configuration and zone alias
names already created to be changed.
Expunges specified zone, zone configuration and/or zone
alias name.
Copies specified zone, zone configuration and/or zone
alias information.
- 172 -