NEC SigmaBlade N8406-040(F) User Manual page 46

supportsave 実施例：
CN8928C00G:admin> supportsave
This command collects RASLOG, TRACE, supportShow, core file, FFDC data
and other support information from both active and standby CPs and then transfer them to a FTP/SCP
server
or a USB device.This operation can take several minutes.
NOTE: supportSave will transfer existing trace dump file first, then
automatically generate and transfer latest one. There will be two trace dump
files transferred after this command.
OK to proceed? (yes, y, no, n): [no] y
Host IP: 192.168.7.44
User Name: admin
Password:
Protocol (ftp or scp): ftp
Remote Directory: /support/
Saving support information for chassis:SW5480, module:RAS...
.................
Saving support information for chassis:SW5480, module:CTRACE_OLD...
Saving support information for chassis:SW5480, module:CTRACE_NEW...
Saving support information for chassis:SW5480, module:FABRIC...
..
..
Saving support information for chassis:SW5480, module:CORE_FFDC...
No core or FFDC data files found!
Saving support information for chassis:SW5480, module:DIAG...
：
：
：
：
......
SupportSave completed
2009/10/20-15:39:41, [SS-1000], 129, CHASSIS, INFO, SW5480, supportSave has uploaded support
information to the host with IP address 192.168.7.44.
CN8928C00G:admin>
......
FTP サーバ IP アドレス
FTP サーバユーザーID
FTP サーバパスワード
転送先ディレクトリ
転送プロトコル
- 46 -