NEC SigmaBlade N8406-040(F) User Manual page 192

IMPORTANT:
Running the command causes the 8G FC Switch to be enabled.
Check the following settings on the 8G FC Switch.
7.
Domain ID
Zoning setting
Port setting
Other setting items
Type "reboot" command on the console screen.
8.
IMPORTANT:
A part of information set by "configdownload" is enabled after the 8G FC Switch is
rebooted. To enable all settings, always reboot the 8G FC Switch.
Confirm that the 8G FC Switch is started normally.
9.
- 192 -