Phoenix Model CLASSIC-EP Instruction Manual page 3

1 Installing the wing halves.
Installing the wing halves.
1
Draw a center line.
3
Glue the wing joiner to the wing.
5
Glue the wing by epoxy.
2 Installing the aileron servo and linkage.
Installing the aileron servo and linkage.
7
Glue the two hard wood by C.A glue.
Center line
2
Remove the covering.
4
Apply the epoxy into the wing section.
6
Apply the trim tape to the center section on the top and the
bottom of the wing where they join.
8
Mark the shape of the servo box to the wing.
2