Roland VersaCamm VS-640i Setup Manual page 34

5. Installing the Ink Cartridges
3.
Perform cleaning with a cleaning stick.

OPEN COVER R

APPLY
CLEANING LIQUID
w
x
APPLY
CLEANING LIQUID
32
When the screen shown on the left appears, open the cover R.
Touch the location shown in the figure to discharge any static electricity.
Screws
Cover R
Hook
When the message shown on the left appears, put the cleaning
stick in the cleaning liquid and clean the indicated location.
Use one cleaning stick per cleaning session, then discard the stick after use.
Reusing cleaning sticks may reduce printing quality.
Screws
Cover R
Hook
Press .
Discharge static electricity
Area to clean.
After cleaning, install the cover R.