Roland VersaCamm VS-640i Setup Manual page 43

w
x
y
z
Click [OK] in the [Local Area Connection Properties] dialog box, and then click [Close]
in the [Local Area Connection Status] dialog box.
Click [Properties].
Click [Allow] when the [User Account Control] dialog
box appears.
The [Local Area Connection Properties] dialog box will appear.
Select [Internet Protocol Version 4 (TCP/IPv4)] (Win-
dows Vista/7) or [Internet Protocol (TCP/IP) (Windows
XP), and then click [Properties].
If the check box for [Internet Protocol] is unselected, then click
and check the box.
Select [Use the following IP address]. Enter the infor-
mation as shown below, and then [OK].
[IP address]: 192.168.0.XXX
[Subnet mask]: 255.255.255.0
Note: Here, "XXX" can be any number between 1 and 254.
However, be sure to avoid the numbers overlapping with those
for other computers or devices. Here, as an example, enter
"192.168.0.101" for the IP address and "255.255.255.0" for the
subnet mask.
7. Network Settings
41