Installation Environment; Deciding On An Installation Site - Roland VersaCamm VS-640i Setup Manual

1. Installation Environment

Deciding on an Installation Site

Install in a quiet, stable location offering good operating conditions. An unsuitable location can cause accident,
fire, faulty operation, or breakdown.
WARNING
WARNING
WARNING
WARNING
WARNING
CAUTION
Unsuitable Installation Sites
 Locations subject to large fluctuations in temperature or humidity
 Locations subject to shaking or vibration
 Locations where the floor is tilted, not level, or unstable
 Dusty locations
 Locations exposed to direct sunlight
 Locations exposed to direct near air-conditioning or heating equipment
 Locations exposed to water or moving air
 Locations exposed to considerable electrical or magnetic noise, or other forms of electro-
magnetic energy
18
Install the machine in a location that is level, stable, and able to bear the
weight of the machine.
The total weight may reach over 225 kg (497 lbs) for the 64-inch model, 190
kg (419 lbs) for the 54-inch model, and 155 kg (342 lbs) for the 30-inch model.
Installation in an unsuitable location may cause a major accident, including tip
over, fall, or collapse.
Never install out of doors or in any location where exposure to water or
high humidity may occur.
Current leakage may cause electrical shock, electrocution, or combustion and
fire.
Never install close to any flammable object or in a gas-filled location.
Combustion or explosion may be a danger.
Install in a clean, brightly lit location.
Conduct operations in a clean, brightly lit location. Working in a location that
is dark or cluttered may lead to an accident, such as becoming caught in the
machine as the result of an inadvertent stumble.
Position so that the power plug is within immediate reach at all times.
This is to enable quick disconnection of the power plug in the event of an emer-
gency. Install the machine next to an electrical outlet. Also, provide enough
empty space to allow immediate access to the electrical outlet.
Ensure adequate ventilation for the work area.
Failing to perform ventilation may result in a health hazard or danger of com-
bustion due to ink fumes.