Introduction - Response Protector P500S Installation & Operating Manual

INTRODUCTION

The Protector P500S Alarm System contains all
components necessary to install a complete system.
Items included are:
1 x Control Unit
1 x D.C. Mains Adaptor
2 x Wirefree Passive Infra Red Detectors
2 x Wirefree Magnetic Contact Detectors
1 x External Solar Siren
Wirefree Passive Infra
Red Detectors (PIR's)
Control Unit
(optional back-up battery NOT included).
DC Mains Adaptor
Protector P500S
Wirefree Magnetic
Contact Detectors
WP1.2-6
Rechargeable Battery
(supplied fitted in the External Siren)
Also included:
Installation & Operating Manual
All necessary fixings
Window stickers
EXTENDING YOUR SYSTEM
Having selected a Protector Wirefree Alarm System, you can
increase your protection by adding additional Wirefree Passive
Infra Red Detectors (PIR's) or Wirefree Magnetic Contact
Detectors, either at the time of initial installation or at a future
date. Full details of other accessories to extend your system
are given on page 19. You may also wish to purchase Remote
Control Unit(s) to enable you to operate your Control Unit from
in or around your premises.
External Solar Siren
Detector Batteries
1