Formax FD 2054 AutoSeal Operator's Manual page 16

Measuring Fold Lengths
Use the examples below to help determine the fold lengths for custom fold settings.
Example 1: "Z" Fold
1. Measure the length of panel "A", enter this number as the upper
fold table measurement.
2. Measure the length of panel "B", enter this number as the lower
fold table measurement.
Example 2: "C" Fold
1. Measure the length of panel "A" + "B", enter this number as the
upper fold table measurement.
2. Measure the length of panel "B", enter this number as the lower
fold table measurment.
12
Panel A
Panel B
Panel A
Panel B