Formax FD 2054 AutoSeal Operator's Manual page 7

4. Plug the fold table cables into the receptacles on the side
frame (Fig. 3 & 4).
5. Insert the telescoping extension tray into the end of the
outfeed conveyor (Fig. 5).
6. Make sure the power switch is in the "OFF" position.
Plug the power cord into the power inlet and the wall
outlet.
Upper Fold Table Receptacle Location
Fig. 3
Lower Fold Table Receptacle Location
Fig. 4
Fig. 5
Telescoping extension tray
3
Plug in Receptacle
Plug in Receptacle