Formax FD 2054 AutoSeal Operator's Manual page 10

9. Select the fold type by pressing the fold selection button
(Fig 9).
10. Press the "1x" button on the control panel to test and
check the folds (Fig 10).
NOTE: When the "1x" or "
fold tables return to the "home" position then reposition
to the programmed setting.
11. If the fold is skewed, remove forms, lower the infeed
tray extension and turn the skew adjustment knob left
or right to make corrections (Fig 11).
12. When satisfied with the test folds, press the "
to start the folder. Press the "
13. Press the "-" or "+" buttons to adjust machine speed to
desired level.
" button is pressed, the
" button
" button to stop.
Fig. 9
Fold selection button
Fig. 10
Fig. 11
6
Test Button
Skew Adjuster