Batch Counting - Formax FD 2054 AutoSeal Operator's Manual

BATCH COUNTING

Two options are available for batch counting: ManuBatch for
standard batch counting, and AutoBatch for programmed
batch counting. Select "Batch Counting" and press the "
button to enter batch counting modes.
ManuBatch
The "ManuBatch" or "manual batch" feature allows you to program the number of sheets you would like to process in a
set. When the set is complete, the pressure sealer will stop and automatically reset the batch count to the previously set
number of sheets. It will then fold the next set when the "
1. To enter ManuBatch mode, highlight "ManuBatch"
on the "Batch Counting" screen using the "
buttons. Press the "
2. Select the number of forms to be processed by
pressing the "
to start. Press the "C" button to exit to the main
screen.
" button to enter.
" buttons. Press the "
"
" button is pressed.
"
" button
8