Table of Contents
Advertisement
Figure 247 Management > Syslog
The following table describes the labels in this screen.
Table 189 Management > Syslog
LABEL
Syslog
Logging Type
Active
Facility
Privilege
Apply
Cancel
44.3 Syslog Server Setup
Click Management > Syslog > Syslog Server Setup to view the screen as shown next. Use this screen to
configure a list of external syslog servers.
Chapter 44 Syslog
DESCRIPTION
Select Active to turn on syslog (system logging) and then configure the syslog setting
This column displays the names of the categories of logs that the device can generate.
Select this option to set the device to generate logs for the corresponding category.
The log facility allows you to send logs to different files in the syslog server. Refer to the
documentation of your syslog program for more details.
Select a command privilege level. The Switch will only generate logs for commands that have a
privilege level greater than or equal to the specified privilege level.
Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to save
your changes to the non-volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
MES3500-24S/MGS3520 Series User's Guide
373
Advertisement
Table of Contents
Troubleshooting
